stationary scissor lift platforms

Stationary scissor lift are fixed lifting platform's flagship product for the transport of goods between storey buildings, is mainly used for all kinds of work the upper and lower layer transport cargo warehouses and other workshops; between three-dimensional garage and underground garage storey car lift and so on.

Fixed Scissor lifts, high degree of stability scissor structure, and hydraulic drive, solid structure, carrying capacity, stable lifting, easy installation and maintenance, cargo room is ideal for economical and practical alternative to low-floor elevator transportation equipment. The hydraulic lifting platform installation environment requirements, choose a different optional, you can achieve better results.

scissor lift China suitable for installation in indoor and outdoor environmental conditions, which can be used according to requirements in a closed hoistway installed within or between open floor; mounted on the inner concave pit or plain ground

How to properly use the mobile dock ramp

When using and maintaining the mobile loading ramp, keep steady and countertops, solid, fixed chain must be fixed firmly with the car, the speed limit 3 km / h when hauling. Ramps descent, and banned all staff to climb, the ramps do not overload the course of the job. The hydraulic oil clean and shall not be mixed in water and other impurities, usually once every six months to replace the hydraulic oil is typically winter No.32, summer with the No.46, when ramps failure, should immediately stop operation, troubleshooting.

Movable handle pressure rise, so loading dock ramp rise above the compartment floor. Vehicles in place, release the oil return valve, Ramps drop and lip smooth ride to the vehicle rear, to chain ramps and car fixed firmly, when the hydraulic system is not force, you can start the job. After work, release the fixed chain, press the movable handle ramps rise, vehicles drove away, ramps reset. ramps lift the tail, hanging in the car to move.

Dock loading ramp is widely used for non-cargo handling equipment, loading and unloading station and mobile sites, is used in conjunction with a cargo truck auxiliary equipment. With this equipment, forklift directly into the interior compartment of the car bulk handling operation. Just one-man operation, no power supply, it can achieve fast loading and unloading cargo security. It can enable you to reduce labor intensity, but also doubling the loading and unloading efficiency, accelerate the velocity of the material, to obtain greater economic benefits.

how to choose a mobile dock ramp

If your requirements for function is not very strictly, we advise clients to choose the way of manual lifting. if it is the high complexity of mobile climbing trolley, advising clients to choose a large formal machinery enterprises design and production, to avoid the small enterprise oneself actual strength caused by the lack of equipment quality problem.
 
Mobile climbing trolley drops essential, within the range 0 to 2 meters because of their own vehicle bridge design characteristics, the lifting height of hydraulic oil reached the maximum when the need is very finite, tank volume is small, often artificial rocker way in a few seconds can rise to the highest, if in automatic mode, control difficulty will increase, there is currently no effective power integrated operation module is used to control the precision of lift.

The different and contact between mobile dock leveler and dock leveler 

With the development of trade, import and export business volume is constantly rising steadily, which is the logistics industry reached a peak, it also gives rise to the competent assistant Ramps, Ramps can be divided into mobile boarding Ramps and bridges fixed, then there is a link between these two and different.

mobile dock ramp: no loading and unloading platform for on-site or need flow loading and unloading places. If there is no loading dock logistics field, as a remedy, Mobile Ramps is one very applicable program, Mobile Ramps equivalent of a moving steel knot slope, forklift truck can also directly into the vehicle interior bulk loading and unloading operations. Just one-man operation, no power supply, it can achieve fast loading and unloading cargo security.

dock loading ramp: Fixed Ramps achieve rapid loading and unloading of cargo auxiliary equipment, set up between its height adjustment feature uses trucks and warehouse dock bridge, forklifts and other moving cargo truck driving and internal volume handling, only a single person operation, you can achieve rapid loading and unloading of goods. It enables enterprises to reduce a lot of labor, improve efficiency, to obtain greater economic benefits.

Features: convenient loading, stability, low maintenance costs. Applicable to all kinds of vehicles and traffic on the site handling relatively busy place. Loading platform, lifting platform, unloading platform: anti-slip car devices: The device is made of welded steel plate, can effectively achieve the anti-skid function, safe and reliable.

Advantages of loading dock ramp

On the one hand, the level of the car as the car is not the same, the mobile dock ramp can freely adjust the height, then the truck can log into the car by moving the axle load or unload the car, and a person can operate the work can be completed . It can save a lot of labor and improve work efficiency.

   On the other hand, it has its own loading dock ramp  features. Since most mobile hydraulic dock leveler is, the need for additional electrical equipment, only need to use the hand-pump can generate power to adjust the height Ramps; on this product can be adjusted equipment length of steel or other materials made of chain can hold the car in order to make a perfect fit with the car dock leveler; at the bottom Ramps have a special brake pads to prevent motion blur caused when the job; Ramps The mesa is shaped diamond grid plate, and the material for the special steel, Ramps can guarantee quality assurance, and network structure of corrugated steel grid to provide anti-slip function, even in bad weather conditions can be guaranteed a job The normally.

How to normal maintenance elevator

As the development of hydraulic lift, how to main the hydraulic lift become moreand more important. As hydraulic lift manufactures, we need tell the user how to main the machine in daily use.

1.Operate the hydraulic lift rightly. First of all, train operator , standardized operation also regularly check, found irregularities elevator, to immediately punishment, serious to out of this position.

1.The regular replacement of hoist hydraulic oil: elevator used in the hydraulic oil is divided into the winter and summer, that is the place where many lifter customers don't pay attention to, often inject a hydraulic oil is used regardless of the long, often wait to cause the elevator hydraulic oil cylinder to detect abnormal work.So what how to replace the elevator hydraulic oil is right, the weather is cold in winter, elevator hydraulic oil is easy to become sticky some so thin to use some of the hoist hydraulic oil;Summer weather is hot, the temperature is higher, elevator hydraulic oil is easy to become thin, so let's use some sticky.

3.Elevator maintenance regularly add lubricating oil: in the process of elevator use, because the load is bigger, cause friction between each component is relatively large, especially chain elevator and elevator shaft pin, in guarantee before each use, add lubricating oil, ensure flexible running work

4.Maintenance of elevator is the most important thing is whether elevator in allowing any abnormal phenomenon, should immediately stop working.

Welcome to mornlift for further information.

The importance of butter for hydraulic lift platform

Butter is industrial chemical products that is widely used in industrial production, machinery and equipment manufacturing, maintenance, and daily life of common. It is also import for hydraulic lift platform manufacturing equipment industry,  also will not be a lack of industrial supplies, use butter has a great effect on hydraulic lift platform.

Hydraulic lift platform especially shear fork lift equipment at work for the strut between lining sleeve and a shaft will be the first serious wear and tear, especially large tonnage of the lift platform is subjected to severe wear, if you don't use high-performance wear-resisting butter easy to equipment damage, in the last few years my company has received a lot of return factory lift platform, the most serious already wear will support arm fracture, manual forklifts, electric truck, electric lift platform, automobile tail plate, if not timely maintenance cause lifting equipment overall fracture deformation, lead to equipment break down, the maintenance cost is quite high, more important is the use of delay production enterprise, has a customer of Nanchang because they don't pay attention to the maintenance of equipment, lead to equipment problems, loss of up to tens of thousands of yuan a day, many lessons are worthy of reference, so there is no time for equipment maintenance, using high-performance butter is very necessary.

Customers friends in the choose and buy hydraulic lifting equipment must be according to my company's maintenance manual for maintenance, to ensure that products can play to the maximum working efficiency

How to use Mobile Ramps ?

Dock ramp for logistics and warehousing businesses, presumably no stranger. It is used in conjunction with the truck loading and unloading cargo, can greatly enhance the work efficiency and reduce the difficulty of the work, and to effectively ensure the security of goods. Of course, the premise is the enterprise to achieve this effect correct operation of Mobile Ramps. Unfortunately, many companies in the use of mobile Ramps, often misuse that give Ramps caused unnecessary damage, reducing the loading ramp life.

According to well-known domestic manufacturer of mobile Ramps, Jinan MORN Technology Co., Ltd. introduced Mobile Ramps before use, you should first check valve are tightened unloading equipment at confirmation unloading valve closed premise, only You can start operating. At the same time, the operator should go through professional training, the use of mobile Ramps, conservation have a full knowledge and understanding so that not only helps to skillfully operate the device, and easy to find equipment malfunction or failure.

under normal circumstances, the operation of Mobile Ramps more divided into the following steps:

1. Hydraulic Mobile Ramps bar to shake to the position desired height, should generally be higher than the truck box board

2. Place the truck down the line to Ramps tongue plate area, open the manual valve door, let Ramps tongue slowly falling, the pressure on the bottom of truck cargo box, and then lock the manual valve gate

3. Lower Mobile Ramps support frame, in order to ensure a smooth Ramps supported on the ground

4. Deng Axle lip hook even the sides of the Mobile Ramps fixed to both sides of the truck, and the truck to prevent separation Ramps

5. The mobile boarding bridge on both sides of the brake blocks, placed in the rear tires to prevent tire slippage

6. Mobile Ramps down both sides of the transom, so Ramps was sloping, connected to the ground and the truck

7. When the confirmation device fixed completely, steady support frame, brake blocks effective after placement, you can start using Mobile Ramps

MORN remind the business, in the Mobile Ramps tongue plate and truck links, be sure to lock the manual valve, and with both sides of the tongue plate Hook the dock leveler and truck is fixed, so can effectively avoid Mobile Ramps and trucks separation, causing unnecessary injury and loss of goods.

In addition, to remind you that in the Mobile Ramps during use, pay attention to keep the fuel tank is not difficult to make the device state, not a long time to make Mobile Ramps cylinder high-load work to extend the life of the equipment.

How the manufacture set the stationary dock ramp price

Raw materials, raw materials are the key factors influencing the equipment prices raising and falling, rising raw material prices not only affect the equipment of container ramp also affects the whole industry chain equipment price.

Labor costs, because labor costs gradually on the rise, this part of the cost has also been added to the device, caused the overall equipment prices higher.

Equipment weight, As the custom is customized according to customer's requirements, equipment tonnage equipment size and the using quantity of materials are the important factors influencing the price of dock ramp. The bigger, the more expensive.

Manufacturers, different manufacturer production equipment is slightly different. Both in quality and technology has a certain difference, good quality and advanced technology of manufacturing production factory price is high, backward technology, the quality is slightly lower manufacturers price is lower.

Profit space, because custom equipment price is not transparent, not regular standard equipment, factory in order to earn more profits, improve the sales price.

The development of hydraulic lift platform in the future

Hydraulic lift platform in China has more than 30 years of development, it has been widely used in various fields of national economy. The types of hydraulic lifting platform is also get multiple segmentation, its structure and function structure constantly improve according to customers’ requirements

Hydraulic lift platform, as a kind of aerial work platform, is widely used in national economy, the botanical garden of the daily maintenance, three-dimensional garage, warehouse, high-altitude equipment  maintenance, etc. It has developed into three major categories, mobile hoist, fixed hoist, aluminum alloy elevator.its each kind of inside are divided into several small classes. Hydraulic lifting platform has an important position in national economy and its existence, the industry is also a very promising industry. 

As hydraulic lift platform manufacturers’ continuous improvement of technology and the particularity of customer demand for elevator, hydraulic lifting platform performance become great. This is not only related to the life safety of the operator, the customer still feel the durability of elevator and cost-effective problem, the customer  wants to spend the least money to get the best and most suitable products.This gives the elevator manufacturers a very high requirements.How to ensure the safety of cargo-lifts operation under the condition  of lower cost,  in this through personal view is that lift must have high quality and high welding process, to ensure the safety of the operation of the elevator, the second value in the cost of compression, good products.Good price is what customers actually want, inferior products on the market is untenable forever, also can cause damage to the industry.

hydraulic lift maintain during autumn and winter

As the weather turns cold constantly, use and operation of hydraulic equipment can not fail to pay attention to some problems, because of the weather can cause a variety of different situations occur, in order to use the safe operation of the fall and winter, Mornlift provide some simple analysis here Notes:

First, due to the cold weather, according to the "thermal expansion" principle, the hydraulic oil will shrink hydraulic lifting platform lifting relatively slow decline, the efficiency decreased, then the need for preheating the lifting platform, will open lifts repeat rise and fall round operation, to achieve a situation can quickly rise, you can use a normal operation.

Second, the use of pre-checked, especially for parts of the installation to inspect welds found no abnormal situation during cargo operations, to prevent loose lead solder welding accidents occur.

Third, when the weather turns cold, the hydraulic oil in the cold air will lead to the lifting platform lift becomes very slow, is not conducive to cargo handling efficiency, which is what we need to replace the winter often use 32 # hydraulic oil entering the winter before replacing protect hydraulic lifting platform and similar hydraulic equipment normally used to prevent freezing affect the use of hydraulic oil.

Fourth, in cold weather, in order to ensure the coordinated use of various parts of the lifting platform, out of the power unit to be checked, but also on the various branches of the hydraulic lifting platform smear butter, ensure operational lubrication. For the electrical control box must be properly maintained to prevent damage in cold inclement weather.

If lifting platform installation and construction in the cold winter which is in need of special attention to construction safety, the best weather in the warm sunny situation.

Mornlift attend the Bauma Fair

From 25-28th Nov, we attend the Bauma fair hold on Shanghai. It's a machinery worldwide fair, we also meet some clients there.

There are also some other suppliers of hydraulic boom lift, scissor lifts, and dock ramps.

Pls visit our site for more info www.mornlift.com

how to maintain hydraulic aluminum lift in raining days

Aluminum lift platform includes different specifications monorail column, dual column, three columns kneeling, kneeling four columns, etc., using aluminum lift first thing to note is the safety issue aluminum lift, followed by small as you explain aluminum lift how in the rain protection:

1, after the aluminum lift installation requires the installation of protective nets around to prevent injuries to people and goods falling under the platform.

2, you must install the organ protective cover to prevent aluminum lift operator lifts limbs were damaged.

3, must be accompanied by security windproof rope taut while working outdoors wind rope, aluminum lift to maintain stability, to ensure the safety of staff countertops.

4, aluminum lift, lift cylinder sleeve in addition to the supplied lanyard level meter to be installed outside, first adjust the level of the table can be carried out lifting operations.

Aluminum lift must be designed to meet the requirements, to ensure that meet customer requirements while ensuring the safety of the customer's operation. This is the most important.

easy time for a little joke

Mornlift provide you with better lift.

A old snake goes to see his Doctor.
"Doc, I need something for my eyes... Can't see well these days."
The Doc fixes him up with a pair of glasses and tells him to return in 2 weeks.
The snake comes back in 2 weeks and tells the doctor he's very depressed.
Doc says, "What's the problem... Didn't the glasses help you?"
"The glasses are fine doc, I just discovered I've been living with a water hose the past 2 years!"

applications for articulated boom lift

Classification of applications for articulated boom lift

Folding arm aerial vehicles are widely used in municipal, electricity, street lighting, advertising, communications, photography, gardening, transportation, ports, airports, ports, large industrial and mining industries such as installation and maintenance and climbing operation.


For the wild variety of rugged terrain, a wide range of space operations, mainly used in construction, bridge construction, shipbuilding and construction, airports, mines, ports, telecommunications and power facilities and outdoor advertising engineering machinery and equipment.

Diesel folding arm lift: no external power supply, erection suitable for field work at height, walking and diesel powered lift, big power, walking speed.


Trailer folding arm lift: can be hung on the car, synchronized with the car, suitable for field-altitude operations. Lift: 1, 2 with 380-220V power supply, power supply is not convenient, you can use the battery-driven lift. Good looks, easy to walk.

Car folding arm lift: the Boom Lift installed in the car, the use of power-driven car lift. Field far away for high altitude operations.

working principles for articulated boom lift

working principles for articulated boom lift as bellow:

Hydraulic oil from a certain pressure vane pump, the filter, explosion-proof solenoid valve, throttle check valve, balance valve into the lower end of the hydraulic cylinder, the upward movement of the piston cylinder, improve weight matter, the upper end of the hydraulic cylinder return oil through flameproof solenoid valve to the tank, which is adjusted by the rated pressure relief valve, pressure gauge readings by observing the pressure gauge.

Hydraulic cylinder piston downward movement (both heavy fall). Explosion-proof hydraulic oil through solenoid valve into the upper end of the hydraulic cylinder, hydraulic cylinder through the lower back to the oil balance valve, check valve, throttle, explosion-proof solenoid valve to the tank. In order to decrease the weight stable, safe and reliable braking, set the balancing valve, balancing loop back to the oil on the road, keep up the pressure, so that the rate of decline from the weight change, the throttle valve regulates the flow, speed control movements. In order to secure the brake to prevent accidents and increase check valve, namely hydraulic lock, ensure that when an unexpected burst hydraulic lines can safely self-locking. Installed voice alarm overload, overload or equipment failure to distinguish.

how to choose a hydraulic cargo lift

 How to choose a proper hydraulic freight elevator, here Mornlift has some suggestions for you: 

1. Hoistway actual situation: hydraulic freight elevator must be installed in a closed hoistway environment, the actual situation of the hoistway determines the final hydraulic freight elevator specifications and dimensions. Specifically including the well width, depth, pit and room and so on. 

2. Rated load. Manufacturing or design requirements of the elevator load (Kg) is the main parameters of the hydraulic freight elevator, generally there is 1000kg, 1500kg, 2000kg, 3000kg, 5000kg and other specifications to choose from, or customers can make non-standard requirements. 

3. Rated speed. Manufacturing or design requirements of the elevator speed in m / s, the main parameters of the elevator. Hydraulic freight elevator general speed 0.25m / s and 0.2m / s, for special circumstances can be designed to a maximum not exceeding 0.5m / s. 

4. Lifting height. Hydraulic freight lift runs from the bottom floor to the height of the top floor. Must accurately measured, because the length of the hydraulic cylinder lift height decision, while the price of the hydraulic cylinder is relatively expensive. 

5. Number of stops and landing door, door count. Have a considerable effect on the price.

aerial working platform for rental

At present, Beijing, Shanghai Aerial platform rental business is experiencing rapid development, the development of domestic leasing industry will drive the demand for aerial work; government departments on high-altitude operations continue to regulate the way of construction.

  Our Aerial Work Platforms has good future prospects, reflected in: Aerial municipal procurement popularity from cities to smaller cities and county-level cities; increasing industry-wide application. In addition to municipal, power outside of Aerial purchases highways, public security, landscaping and other industries will have a faster growth; the current Beijing, Shanghai Aerial lease rapid development, the development of domestic leasing industry will drive the demand for aerial vehicles; government departments to continue to regulate aerial work construction methods, the continuous improvement of safety requirements, will further promote the popularity of the use of aerial vehicles.

Aerial work platforms coming years, China will be a major market in the leasing industry, but also some new areas gradually enter airports, industrial enterprises. I will lay the surly improve basic skills in product lines, sales and service network to establish and improve product quality, etc., to enhance their core competitiveness.

how to make the scissor lift more stable when lifting up

Conventional scissor lift refers to the rice and other such conventional 4-6-8-10-12 with four wheels mobile lifts, in the past few decades with the production of such equipment is one of the largest sales class lift system. Just as the economy develops, the demand is still declining in recent years, but in general, the whole system is a hydraulic lifting equipment is very important part. From the product system is very high in terms of maturity, a class of products, basically domestic enterprises can produce many, many, production threshold is very low, essentially formal legal production lifts enterprise products are no problem.

     Such lifts prone to shaking phenomenon after a period of time, resulting in more factor in this phenomenon, most notably by the three categories, the first category is the overall framework architecture twisted, deformed, these are very serious, basically rare, but it is not non-existent, such problems can only be repairs to the company, the second category is the lack of lubrication, friction caused by rigid struts, causing violent shaking, periodic replacement of butter and other lubricating substances. The third issue is between the pin with the bearing after a long period of use voids appeared integrity shaking.

     Although small amplitude shaking scissor lift is a normal phenomenon, but if the amplitude exceeds a certain limit the scope after not timely corrected, likely to cause a lot of potential security threats, advises clients to do what is best friends comprehensive equipment testing, in order to avoid inadvertent it greater security incidents

truck mounted articulated boom lift introduce

Boom Lift the strict sense is a form of auto lifts, all lift our common and walking in one of the lifts, Boom Lift the support arm of choice for toughness and hardness of steel is very balanced, into electricity start-up mode with diesel locomotives because it is installed in the above two ways of working can be installed as one of the general's own diesel engines are more well-known diesel engine, motivated.

   Works by dual hydraulic arm support or the support of three hydraulic way, because of their performance of the volume used for folding, as well as the support arm determines the support load is very small, not suitable for the weight of a large, bulky objects movements. General crank folding support arm lift lifting height of 6-13 meters, large Boom Lift elevated height of up to 18 meters, weight lifting is a small aerial work best carrier platform.

      Car Boom Lift for arm practices, around the bottom of the platform when the job is not someone or there is an important material, and the need to strengthen the four support legs to stabilize the lift. Small lift is generally a single person or a double aerial work mode, prohibited people while off the job, or carrying heavy loads of large tonnage, resulting in increased lift off the swing amplitude, and even cause Brokeback phenomenon.