hydraulic lift maintain during autumn and winter

As the weather turns cold constantly, use and operation of hydraulic equipment can not fail to pay attention to some problems, because of the weather can cause a variety of different situations occur, in order to use the safe operation of the fall and winter, Mornlift provide some simple analysis here Notes:

First, due to the cold weather, according to the "thermal expansion" principle, the hydraulic oil will shrink hydraulic lifting platform lifting relatively slow decline, the efficiency decreased, then the need for preheating the lifting platform, will open lifts repeat rise and fall round operation, to achieve a situation can quickly rise, you can use a normal operation.

Second, the use of pre-checked, especially for parts of the installation to inspect welds found no abnormal situation during cargo operations, to prevent loose lead solder welding accidents occur.

Third, when the weather turns cold, the hydraulic oil in the cold air will lead to the lifting platform lift becomes very slow, is not conducive to cargo handling efficiency, which is what we need to replace the winter often use 32 # hydraulic oil entering the winter before replacing protect hydraulic lifting platform and similar hydraulic equipment normally used to prevent freezing affect the use of hydraulic oil.

Fourth, in cold weather, in order to ensure the coordinated use of various parts of the lifting platform, out of the power unit to be checked, but also on the various branches of the hydraulic lifting platform smear butter, ensure operational lubrication. For the electrical control box must be properly maintained to prevent damage in cold inclement weather.

If lifting platform installation and construction in the cold winter which is in need of special attention to construction safety, the best weather in the warm sunny situation.

Mornlift attend the Bauma Fair

From 25-28th Nov, we attend the Bauma fair hold on Shanghai. It's a machinery worldwide fair, we also meet some clients there.

There are also some other suppliers of hydraulic boom lift, scissor lifts, and dock ramps.

Pls visit our site for more info www.mornlift.com

how to maintain hydraulic aluminum lift in raining days

Aluminum lift platform includes different specifications monorail column, dual column, three columns kneeling, kneeling four columns, etc., using aluminum lift first thing to note is the safety issue aluminum lift, followed by small as you explain aluminum lift how in the rain protection:

1, after the aluminum lift installation requires the installation of protective nets around to prevent injuries to people and goods falling under the platform.

2, you must install the organ protective cover to prevent aluminum lift operator lifts limbs were damaged.

3, must be accompanied by security windproof rope taut while working outdoors wind rope, aluminum lift to maintain stability, to ensure the safety of staff countertops.

4, aluminum lift, lift cylinder sleeve in addition to the supplied lanyard level meter to be installed outside, first adjust the level of the table can be carried out lifting operations.

Aluminum lift must be designed to meet the requirements, to ensure that meet customer requirements while ensuring the safety of the customer's operation. This is the most important.

easy time for a little joke

Mornlift provide you with better lift.

A old snake goes to see his Doctor.
"Doc, I need something for my eyes... Can't see well these days."
The Doc fixes him up with a pair of glasses and tells him to return in 2 weeks.
The snake comes back in 2 weeks and tells the doctor he's very depressed.
Doc says, "What's the problem... Didn't the glasses help you?"
"The glasses are fine doc, I just discovered I've been living with a water hose the past 2 years!"

applications for articulated boom lift

Classification of applications for articulated boom lift

Folding arm aerial vehicles are widely used in municipal, electricity, street lighting, advertising, communications, photography, gardening, transportation, ports, airports, ports, large industrial and mining industries such as installation and maintenance and climbing operation.


For the wild variety of rugged terrain, a wide range of space operations, mainly used in construction, bridge construction, shipbuilding and construction, airports, mines, ports, telecommunications and power facilities and outdoor advertising engineering machinery and equipment.

Diesel folding arm lift: no external power supply, erection suitable for field work at height, walking and diesel powered lift, big power, walking speed.


Trailer folding arm lift: can be hung on the car, synchronized with the car, suitable for field-altitude operations. Lift: 1, 2 with 380-220V power supply, power supply is not convenient, you can use the battery-driven lift. Good looks, easy to walk.

Car folding arm lift: the Boom Lift installed in the car, the use of power-driven car lift. Field far away for high altitude operations.

working principles for articulated boom lift

working principles for articulated boom lift as bellow:

Hydraulic oil from a certain pressure vane pump, the filter, explosion-proof solenoid valve, throttle check valve, balance valve into the lower end of the hydraulic cylinder, the upward movement of the piston cylinder, improve weight matter, the upper end of the hydraulic cylinder return oil through flameproof solenoid valve to the tank, which is adjusted by the rated pressure relief valve, pressure gauge readings by observing the pressure gauge.

Hydraulic cylinder piston downward movement (both heavy fall). Explosion-proof hydraulic oil through solenoid valve into the upper end of the hydraulic cylinder, hydraulic cylinder through the lower back to the oil balance valve, check valve, throttle, explosion-proof solenoid valve to the tank. In order to decrease the weight stable, safe and reliable braking, set the balancing valve, balancing loop back to the oil on the road, keep up the pressure, so that the rate of decline from the weight change, the throttle valve regulates the flow, speed control movements. In order to secure the brake to prevent accidents and increase check valve, namely hydraulic lock, ensure that when an unexpected burst hydraulic lines can safely self-locking. Installed voice alarm overload, overload or equipment failure to distinguish.

how to choose a hydraulic cargo lift

 How to choose a proper hydraulic freight elevator, here Mornlift has some suggestions for you: 

1. Hoistway actual situation: hydraulic freight elevator must be installed in a closed hoistway environment, the actual situation of the hoistway determines the final hydraulic freight elevator specifications and dimensions. Specifically including the well width, depth, pit and room and so on. 

2. Rated load. Manufacturing or design requirements of the elevator load (Kg) is the main parameters of the hydraulic freight elevator, generally there is 1000kg, 1500kg, 2000kg, 3000kg, 5000kg and other specifications to choose from, or customers can make non-standard requirements. 

3. Rated speed. Manufacturing or design requirements of the elevator speed in m / s, the main parameters of the elevator. Hydraulic freight elevator general speed 0.25m / s and 0.2m / s, for special circumstances can be designed to a maximum not exceeding 0.5m / s. 

4. Lifting height. Hydraulic freight lift runs from the bottom floor to the height of the top floor. Must accurately measured, because the length of the hydraulic cylinder lift height decision, while the price of the hydraulic cylinder is relatively expensive. 

5. Number of stops and landing door, door count. Have a considerable effect on the price.

aerial working platform for rental

At present, Beijing, Shanghai Aerial platform rental business is experiencing rapid development, the development of domestic leasing industry will drive the demand for aerial work; government departments on high-altitude operations continue to regulate the way of construction.

  Our Aerial Work Platforms has good future prospects, reflected in: Aerial municipal procurement popularity from cities to smaller cities and county-level cities; increasing industry-wide application. In addition to municipal, power outside of Aerial purchases highways, public security, landscaping and other industries will have a faster growth; the current Beijing, Shanghai Aerial lease rapid development, the development of domestic leasing industry will drive the demand for aerial vehicles; government departments to continue to regulate aerial work construction methods, the continuous improvement of safety requirements, will further promote the popularity of the use of aerial vehicles.

Aerial work platforms coming years, China will be a major market in the leasing industry, but also some new areas gradually enter airports, industrial enterprises. I will lay the surly improve basic skills in product lines, sales and service network to establish and improve product quality, etc., to enhance their core competitiveness.

how to make the scissor lift more stable when lifting up

Conventional scissor lift refers to the rice and other such conventional 4-6-8-10-12 with four wheels mobile lifts, in the past few decades with the production of such equipment is one of the largest sales class lift system. Just as the economy develops, the demand is still declining in recent years, but in general, the whole system is a hydraulic lifting equipment is very important part. From the product system is very high in terms of maturity, a class of products, basically domestic enterprises can produce many, many, production threshold is very low, essentially formal legal production lifts enterprise products are no problem.

     Such lifts prone to shaking phenomenon after a period of time, resulting in more factor in this phenomenon, most notably by the three categories, the first category is the overall framework architecture twisted, deformed, these are very serious, basically rare, but it is not non-existent, such problems can only be repairs to the company, the second category is the lack of lubrication, friction caused by rigid struts, causing violent shaking, periodic replacement of butter and other lubricating substances. The third issue is between the pin with the bearing after a long period of use voids appeared integrity shaking.

     Although small amplitude shaking scissor lift is a normal phenomenon, but if the amplitude exceeds a certain limit the scope after not timely corrected, likely to cause a lot of potential security threats, advises clients to do what is best friends comprehensive equipment testing, in order to avoid inadvertent it greater security incidents

truck mounted articulated boom lift introduce

Boom Lift the strict sense is a form of auto lifts, all lift our common and walking in one of the lifts, Boom Lift the support arm of choice for toughness and hardness of steel is very balanced, into electricity start-up mode with diesel locomotives because it is installed in the above two ways of working can be installed as one of the general's own diesel engines are more well-known diesel engine, motivated.

   Works by dual hydraulic arm support or the support of three hydraulic way, because of their performance of the volume used for folding, as well as the support arm determines the support load is very small, not suitable for the weight of a large, bulky objects movements. General crank folding support arm lift lifting height of 6-13 meters, large Boom Lift elevated height of up to 18 meters, weight lifting is a small aerial work best carrier platform.

      Car Boom Lift for arm practices, around the bottom of the platform when the job is not someone or there is an important material, and the need to strengthen the four support legs to stabilize the lift. Small lift is generally a single person or a double aerial work mode, prohibited people while off the job, or carrying heavy loads of large tonnage, resulting in increased lift off the swing amplitude, and even cause Brokeback phenomenon.

could lead rail cargo lift designed to be single post

Can be set according to the different needs of different specifications of the program, as well as counter tops for partial load demand is not great lift, is completely single-cylinder design of products, consider using a single cylinder or double cylinder lift by many aspects of the production factors and single-cylinder design needs to solve many problems.

   

 First single cylinder lift rail is not suitable for the needs of the work surface is too large, if the work surface is too large, it will cause the device to the overall balance is affected, that is not enough to prop up the single cylinder mesa over-sized equipment, how much is in accordance with the customer's specific design requirements, depending on the size of the fuel tank functions to determine the maximum available to support work surface. Second, load demand, although the table can be achieved using a single cylinder, but if the demand load is too large, the maximum carrying capacity beyond the single cylinder can afford, but also a need to take into account aspects. Single cylinder products, though lower lift costs, but security and stability of the device has a lot Ventura need to solve, if the overall solution is completed, the cost of equipment may not be more than the cost of two-cylinder product solutions is low, requires careful accounting.

rotate platform customized for client

Stationary scissor lift can be customized according to client's needs, such as the platform size, lifting height, load capacity, other clients may also have require on the covering skirts, platform guard rails, rotate platform ect.

Here are some examples for the rotate platforms we have produced according to special needs for our customers.

Look at this platform, you could see the rotate platform is irregular, but this is ok, as long as you tell us your needs, we could do it for you.

Our client is very satisfied with it when received this stationary scissor lift platform.

Here is also another platform, which is higher than the one above, also the platform on top can be rotate. Also you could see the lift is movable with four wheels on it, there are supporting legs to ensure stable and safety.

More info, pls contact us directly 

contact Grace,

email se@mornlift.com

skype se.sinicmech.com

tel/wechat/whatsapp 8618769733177

truck scissor lift introduce

Truck scissor lift also named truck mounted scissor lift. there is a scissor lift fixed on a truck, to meet aerial working needs.

a. The scissor lift is equipped on the diesel truck, can be easily moved especially applies to operation over long distance or field work; safely and smoothly lifting up and down.

b. Provides spacious capacity for several people working together simultaneously with working height from 8 meters to 14 meters and load capacity from 0.3 Ton to 1 ton (Please refer to the model list).

c. The scissor lift can be powered by the diesel engine on the selected vehicle or by independent battery or external AC powers.

working principles for hydraulic lift

Hydraulic cylinders working principle are as below:
Info come from mornlift

Hydraulic drive principle - to oil as the working medium to transmit motion by changing the sealed volume, power is transmitted through the fluid pressure inside.
1, the dynamic part - the original motivation of the mechanical energy is converted to pressure energy fluid (hydraulic energy). For example: a hydraulic pump.
2, the operative part - the oil pressure of the hydraulic pump input energy into mechanical energy to drive the work of agencies. For example: a hydraulic cylinder, hydraulic motor.
3, the control section - used to control and regulate the oil pressure, flow rate and flow direction. For example: a pressure control valve, flow control valve and the directional control valve.
4, the secondary part - the first three parts are connected together to form a system, from the oil reservoir, filtering, measuring and sealing effect. For example: pipes and fittings, tanks, filters, accumulators, seals and control instrumentation.

     The pressure in a volume of liquid at any point on the applied size can be transmitted equally in all directions. This means that when using a plurality of hydraulic cylinders, each hydraulic cylinder will pull or push the respective speeds, and these speeds depend the pressure required to move the load.
     A hydraulic cylinder at the same carrying capacity range, the minimum load bearing hydraulic cylinder will move first, carrying a hydraulic cylinder to move the end of the maximum load.
     To make the hydraulic cylinders synchronized movement, in order to achieve load at any point at the same speed is lifting, be sure to use the control valve in the system or synchronous jacking system components.

application scope for hydraulic lead rail cargo lift

Rail lifts, is the use of chain-track structure, a non-scissor lifts, lift rail in recent years with its unique advantages recognized by the majority of users, but under what circumstances the choice of rail lifts more convenient, cost-effective yet today Mornlift would like to tell you about the scope rail lifts.

Rail lift height of 4 meters to 14 meters from, from one ton truck limited to 10 tons. Elevated eight meters below, scissor lift lift than the lower rail costs, usually rises 6 meters or more, can be considered the main rail lifts, it is not lost on scissor elevating stability, ease of operation on lifts.

Rail lifts are generally applicable to the transport of goods between two three-story, you need to set aside a good floor mouth, especially for the need to stay in the room on each floor of the occasion. More rail lift for indoor work, and scissor lifts are more suitable for outdoor work.

When the lift which structure choice, we need to understand the specific applicable places, lifting height, load, table size, the height is low, or load the table in ten tons or larger (15 square meters) is generally used scissor lift, otherwise the use of rail lifts.

For more info, pls check out our site at www.mornlift.com

main characters for mobile dock ramp

Here are some main characters for mornlift mobile dock ramp:

1, hydraulic drive, easy to operate and reliable operation.

2, lip connected with the long axis of the entire platform, high strength, good reliability.

3, imported seals to protect the hydraulic system has excellent sealing performance.

4, the overall use of imported modular hydraulic station, good sealing and long service life.

5, high-intensity "U" shaped beam designed to ensure their long-running high-load without deformation.

6, using non-slip tread plate, so that the platform has a good anti-slip properties.

7, both sides of the fortification apron rolling pin to prevent accidental injury toe stretching platform.

8, is provided to protect maintenance personnel to enter Ramps internal maintenance safety strut.

To know more about us, pls visit our site www.mornlift.com

hydraulic lifts and products from mornlift

Mornlift is a 13 year based manufacture and trading company. we do many kinds of hydraulic lifts. Here are some products we would like to share with you:

1. hydraulic scissor lift, both used for indoor and outdoor, there are mobile scissor lift and stationary scissor lift used for different applications.

2. wheelchair lift for disabled people, vertical use for home and public buildings.

3. we also do hydraulic dock ramps and car parking lifts. more info you may want to visit our site www.mornlift.com

hydraulic lead rail cargo lift for our client

This week, we have our hydraulic lead rail cargo lift shipped. It is for an American client. have a look at this cargo lift, it is quite a big one.

1. the platform size for this cargo lift is 2.6*2.6m. since it is too big for container ship, we cut it into two parts, when client receive it, just connect it with bolts, very easy to install.

2. this is a ramp for the hydraulic lift, as client do not need pit to install the lift, so a ramp is needed for the platform.

3. This is the two lead rails, we had do the pre-installation, so client do not do much work to install it. We also wrapped it with films, to protect dust and the paintings.

4. shipping mark. more info pls visit our site www.mornlift.com

Hydraulic dock ramps as professional loading equipment

So why hydraulic dock leveler loading and unloading equipment can become secondary to the fore one of the most used storage handling equipment. Mornlift here on hydraulic dock leveler feature to share with you:

Firstly, A hydraulic dock leveler can quickly achieve professional equipment loading and unloading of goods, as it can through its height adjustment function between the warehouse dock and set up a bridge of wagons, trucks can use it to enter directly into the boxcars were loading and unloading operations, exponentially increase the work efficiency, but also to protect the security of the whole job.

Second, Ramps with a full hydraulic drive, can be highly arbitrary regulation, improve handling efficiency; lip connected with the long axis of the entire platform, high strength, good reliability; design uses high-intensity "U" shaped beam designed to protect the long time carries no distortion; non-slip surface pattern plate steel, to prevent accidental injury;

Third, Ramps own height adjustment plate in the manufacturing and design process height adjustment plate can be labeled as a bridge of between loading and unloading station and trucks, you can adjust the gap between the gap between the dock and the truck according to the actual situation , the truck directly into the work carried out within the boxcars, height adjustment plate overcome rely on manual handling, time-consuming and a certain degree of risk, the use of flexible height adjustment will dock with the truck ride together, not only to improve operational efficiency, but also strengthen the security of workers and goods.

Fourth, Ramps design tonnage were 6 tons, 8 tons, 10 tons, 12 tons to meet the needs of different cargo handling, suitable for many types of businesses handling of cargo transportation needs. And most manufacturers can be customized according to customer demand, which would also meet the great need for more market customers.

How to maintain a hydraulic lift platform

Now in many industries, for handling and stacking of goods are inseparable from the manual handling of tools and fixed aids loading and unloading cargo, cargo handling in mobile, there are internal combustion forklifts, manual handling car, etc., but in terms of fixed cargo handling there lifting platform, Ramps and other equipment.

During use, these devices have played a very important role, to the entire industry and even the whole economic development have brought a very big help, but these devices also require regular maintenance and repair, or work efficiency and utilization will decline.

Our hydraulic lifting platform, for example, talk about how to pay attention to the repair and maintenance problems of these devices.

Maintenance of choice, but the normal rule is prevention, before breakage or failure to give correct or Buxiu. Carefully check the maintenance cost savings, avoid bigger problems, resulting in costly renovations.

Secondly, based on power-driven hydraulic lifting platform, hydraulic lifting system, the operation to avoid irregular operation, to ensure the normal and orderly work lifting platform, to achieve the desired level of discharge.

Again, weekly checks throughout the week as to whether the lifting platform is connected to tighten seal is damaged or fails, whether the lack of hydraulic oil, the key issues are whether the fuel tank leak check, must be cleaned once a week, for lifting frame, scissors, lines, fuel tanks to clean, so as not to affect the normal operation of dust debris.

Then, for the replacement of the hydraulic oil is best to replace once in March, if the frequency is not high, can be replaced once a year. Hydraulic oil must be clean and must boot automatically after lifting for a good hydraulic oil 2-3 times to clean exhaust air tanks, keep enough space to ensure the lifting platform can lift the rated lifting height.

Then again, carrying the lifting platform countertops need to carry the goods balance, does not allow any party to the phenomenon of partial load, cargo lifting platform does not allow people on both sides of the station, lifting the cargo should try to maintain stable average rate of increase.

Finally, when the lift platform appeared relatively large fault, by a professional as soon as possible to repair faulty after not being used, to avoid accidents, resulting in personal and property damage

contact Grace se@mornlift.com skype se.sinicmech.com

Mornlift team went for mountain climbing

This weekend, our team went for mountain climbing, the mountain called Yingxiongshan also called Hero Mountain.

The mountain is not so high, so it did not took much time for us climb to the top. here are some pics that we would like to share with everybody.

Mornlift has its own company culture, we work hard and also we enjoy the life and we live happily and healthy. You could see we are a very young team, full of engergy and power. Welcome visit our site at www.mornlift.com

Specifications Of Telescopic lift-30m

30m  telescopic lift standard configuration:

Weighing system
Automatic-leveling platform
2-wheel drive&steering
High/low travel speed
Full proportional controls
Protection system on uneven ground
Emergency descend system
Platform rotation
Anti-collision protection of platform
Engine restart protection
Preheating of engine
Grade 3 Throttle control of engine
Dust-proof protection
Solid tire
Ground&Platform control box covers
Strobe light
Horn

Technical specifications

MODEL			SPT-30
Working height maximum			32.1m
Platform height maximum			30.4m
Horizontal reach maximum			22.86m
Specification
A	Platform length	0.91m
B	Platform width	2.44m
C	Height-stowed	3.08m
D	Length-stowed	12.995m
E	Width	2.49m
F	Wheelbase	3.66m
G	Ground clearance-center	0.43m
PRODUCTIVITY
Lift capacity (restricted)			480kg
Lift capacity (non-restricted)			230kg
Platform rotation			±80°
Swing speed			0~1/3rpm
Turntable Swing			360°continuous
Platform leveling			Automatically leveling
Travel speed -stowed			5.4km/h
Travel speed -raised or extended			1.1km/h
Grade ability -stowed (2W)			40%
Turning radius - inside			4.14m
Turning radius –outside			6.56m
Drive&steering type			4*4*4
Solid tires			12.00-20
POWER
Power source			Cummins B3.3-C80
Engine Rated power			60kw/2200rpm
Auxiliary power unit			24V DC
Fuel tank capacity			151L
Total Weight			18500kg

1. Control box and Joystick of control box

Full proportion joysticks and CAN bus as well as PLC control system with high positioning accuracy are easy to be controlled and can be operated by the users at will.

The stainless steel control box with sealing cover and box cap, which can help prevent the electrical components for moisture and prevent the damage from welding slag.

2. High Safety of Body Structure  

Patented Weighting System: can accurately weight what on the platform with automatic division of various load levels;  Automatic power cut-off and alarm with light and sound when the platform is over-loaded.

Patented Socket Tow-Chain System: avoid serious disorder and rupture of the cables and oil-pipes, which is caused by over-bending of boom and cantilever tow-chain. 

3. Traveling System   


Axis Oscillating: driven by hydro-cylinder , the wheel axis oscillating can fully ensure stability of the whole machine when working.

Four-Wheel-Drive and Solid Tires: four turning modes including front-wheel, rear-wheel, front &rear turning and slanting drive, powerful grade ability.

4. Grade-ability(stowed)

It has max 30% Grade ability when driving on slopes with safety protection.

5. Active oscillation axle Swing-out engine tray   

Active oscillation axle can perceive the terrain, and can guarantee that the machine can land on four wheels even on uneven road without reducing the driving force.
In addition, Swing-out engine tray provide a easy way for maintenance and repair 

6. Electrical system and Anti-collision switch

The operating button is visual and easy-to-understand, protection class can be up to IP65.

The anti-collision switch is used to prevent the platform from further moving in case of collision with obstacles upward.

7. Working range and load capacity range

The horizontal reach can be up to 22.86m.

And the boom lift has max 480kg load capacity, which will fit the customer needs at some lower working height.

8. Application-boom lift for sales

MORN Telescopic Boom Lift has good performance to provide a safe and reliable aerial work platform for the user, which applies to even very tough conditions. Meanwhile, it can hold 2-3 operators and working devices. The max grade-ability can be up to 40%, so it can be parked and restarted on such slope without down sliding.


It is widely used for the equipment installations, building cleaning and maintenance at the following places like construction engineering, gardening, bus/railway stations, airports, harbor, curtain wall engineering, gas station and aerial petrochemical industry, etc.

After-sales Services  

1. User-friendly English manual for machine using and maintenance.
2. One year warranty for whole machine without man-made fault;
3. We will send you parts for free if there are any non-human factors problem during warranty time
4. 24-hours technical support by email, telephone or other communication online.
5. We could reply you in 2 hours after received your any questions even on weekend and holiday, engineers are available to your country if necessary.

Contact Us  

Jinan Sinicmech Machinery (MORN GROUP) Co., Ltd
Address: NO.15612 Century Avenue, High-Tech Zone, Jinan, China.


Tel: +86-531-55572832
Fax: +86-531-88692337
Email: sf@mornlift.com sales@mornlift.com
Skype: sf.sinicmech.com


Official Website: www.mornlift.com

 Pls contact us via the infomation above, lets start cooperation here.